text.skipToContent text.skipToNavigation

Error

Maximum of three products are allowed for comparison.

Motors - 4-Pole - SSD Gearbox and Mounting Hardware

Assembly Part Notes

Note Code Definition
A Used for 300 Lb. user weight limit.
B Includes items 3-13, Super Lube Grease and Instruction Sheet. NOTE: Brake Lever is "not" included and must be ordered in Pairs (item 14a) for power wheelchairs manufactured Before 11/9/20. Brake Lever and motor clocking position changed.
C Includes items 3-6, 8-12, Super Lube Grease and Instruction Sheet. NOTE: Brake Lever is "not" included and must be ordered in Pairs (item #14a) for power wheelchairs manufactured Before 11/9/20. Brake Lever and motor clocking position changed.
D Includes items 8-13, Super Lube Grease and Instruction Sheet. NOTE: A left side gearbox that is used on RWD models is assembled to the right side of the wheelchair for TDX SP2 models.
E Includes items 8-13, Super Lube Grease and Instruction Sheet. NOTE: A right side gearbox that is used on RWD models is assembled to the left side of the wheelchair for TDX SP2 models.
F Includes items 15-19. Brake Lever Assembly (item 14a) CONVERTS Brake Levers made Before 11/9/20 to new design. Brake Lever and motor clocking position changed. Both Right and Left side must be ordered to match and have motors re-clocked to new position.
G Includes items 8-12.
H Power wheelchairs manufactured after 11/8/20 utilize a new brake lever and revised motor clocking position. It is not required to order "both" Right (item #14b) and Left (item #14c) Brake Lever Kits.
I Before placing an order, it is recommended to call Invacare's Technical Service Department at (1-800-832-4707) to verify if the Motor, SSD Gearbox or the Motor/SSD Gearbox Assembly is needed.
J Not Shown. Super Lube Grease is applied to the Gearbox Output Shaft and sold in a package of 10.
K HSMTR High Speed Motor Option. Only used with 24TRY Option - 24 Group Style Tray (Wide Base 25.5”)
L When installing a new Motor or Motor/Gearbox Assembly, the Motor will need to be calibrated with Invacare Tech. Services. A LAK is required to complete the calibration.
M Used only for Motion Concepts using the TDX SP2-HD Base Assembly 450Lb. limit).
N For (HSMTR High Speed Motor Option 300 Lb. limit) and (Motion Concepts using the TDX SP2-HD Base Assembly 450 Lb. limit).
O For Motion Concepts using the TDX SP2-HD Base Assembly 450 Lb. limit.